Hunter manual all stations

You can also activate all stations to water without using the dial. Step 1 Hold down the arrow () button for 2 seconds. When you will see station 1 appear on screen, release the arrow () button. Step 2 This feature automatically defaults to program A. You can select program b or C by quickly pressing the PRG button. Step 3Estimated Reading Time: 50 secs.  · Hunter Irrigation for Manual All Stations.  · Hunter controllers allow you to start a station or an entire program manually. To do so, turn the dial to Manual Single Station or Manual All Stations, veri.

J. Hunter controllers allow you to start a station or an entire program manually. To do so, turn the dial to Manual Single Station or Manual All Stations, verify that the stations that you want to activate have run time, and turn the dial back to the Run position. When the station or stations finish watering the controller will go. 2. Start with just one valve at a time. Rotate the manual on/off lever to the on position. Open the manual flow control knob all the way (turn as far as it will go counterclockwise). The valve should come on and sprinklers run. 3. Next rotate the manual on/off lever under the solenoid to the closed position. 5 X-CorE CompoNENTs Dial settings Run Normal dial position for all controller automatic and manual operation Allows current day and clock time to be setCurrent time/Day Allows 1 to 4 start times to be set in each programstart times Run times Allows user to set each valve station run time from 1 minute to 4 hours Water Days Allows the user to select interval days to water.

Hunter Irrigation for Manual All Stations. USER MANUAL Hunter Residential and Light Commercial Irrigation ControllerPC SeriesModular ControllerIndoor/Outdoor Models SPECIFICATIONS Operating Specifications Station Run Time: 1 minute to 6 hours on programs A, B, and C Start Times: 4 per program, three programs for up to 12 starts Watering Schedule: 7-day calendar, interval watering up to a day interval or true odd Continue reading. J. Hunter controllers allow you to start a station or an entire program manually. To do so, turn the dial to Manual Single Station or Manual All Stations, verify that the stations that you want to activate have run time, and turn the dial back to the Run position. When the station or stations finish watering the controller will go back to normal automatic operation.